Want to film with the Amflow TL Carbon? There is a familiar problem: universal handlebar clamps do not fit well in the center of this specific handlebar, especially alongside the DJI Avinox system’s lights and display. The community has a solution: Misupix designed a compact 3D-printed mount that fits precisely in the center of the handlebar.
Mount a GoPro, 360° camera or smartphone on it. It stays firmly in place without vibrations, while leaving room for a Klickfix adapter or a lowered headlight.
A ready-made mount is not yet available for this bike. Follow these three steps to get one on your handlebar for around €35.
1Buy the 3D file (€3.99)
The design is called Amflow TL Carbon - GoPromount for Handlebarcenter and is available on Cults 3D. After payment, download the files in STL or 3MF format. You will need them for the next step.
2Have the mount printed
If you do not have a 3D printer, you can have the mount printed by an online 3D printing service in your area. Most services work like this:
- Upload: drag the file into the online configurator.
- Choose settings: see the table below.
- Price and delivery time: you will see these straight away. Printing starts once you approve.
| Setting | Choose |
|---|---|
| Material | TPU 95A (strong and impact-resistant) |
| Infill | 100% |
| Supports | None, as specified by the designer |
| Bestand | STL / 3MF |
My local 3D printing service charged €30, including shipping.
3Get the bolts and assemble the mount
To mount it on your Amflow TL, you need the following parts. You can find them at a hardware store or bike shop.
| Qty. | Part | Size |
|---|---|---|
| 2× | Bolt | M4, 16–18 mm |
| 2× | Nut | M5 |
| 4× | Bolt | M3, 16 mm |
Good to know
- Carbon is sensitive. Tighten the bolts securely but do not overtighten them, and follow Amflow’s torque specifications.
- Before every ride, check that the mount is still secure, especially after a rough ride or a fall.
- Always print at 100% infill. Vibration can break a hollow print and cause your camera to fall off.
What is the total cost?
| Item | Price |
|---|---|
| 3D-bestand (Cults 3D) | €3,99 |
| Printing by a local service, incl. shipping | ± €30 |
| Bolts and nuts | a few euros |
| Total | ± €35 |
Conclusion
For around €35, you get a mount that fits precisely at the center of your Amflow TL Carbon’s handlebar, where a universal clamp will not. You do not need your own 3D printer: buy the file on Cults 3D and have a local service print it for you.
Questions and comments
Ask a question or leave a comment. It appears only after I have approved it.
No approved comments yet.